[Intel-devsys] Hobbytronics update

Jon Hales jonhales at gmail.com
Mon Aug 26 04:13:10 MDT 2019


Here's the first PDF referred to.

Jon

On Mon, 26 Aug 2019 at 11:11, Jon Hales <jonhales at gmail.com> wrote:

> I thought it might be useful to check the situation with the Hobbytronics
> USB Host Controller v2.4. Please refer to the attached PDF copied from
> their website.
>
> The key part is the text in red. It's only available as a kit with a
> minimum order of 10. And it requires 'a hot plate or oven' because some
> 'SMD components are under the components'. It seems the price has increased
> as well.
>
> A second PDF shows the page about the USBHOST-DIP. Fine for those who
> design boards.
>
> It seems good that some of us took the opportunity to buy assembled and
> tested units while they were available.
>
> Best regards
>
> Jon
>
> Note: some time ago, there was a notice referring to the key staff member
> who built the USB units having had health problems. It seems that situation
> is continuing. We may not be able to count on the same level of
> responsiveness to requests for firmware support in future.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.brouhaha.com/pipermail/intel-devsys/attachments/20190826/060bf1d9/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: USB Host Controller Board V2.pdf
Type: application/pdf
Size: 286383 bytes
Desc: not available
URL: <http://lists.brouhaha.com/pipermail/intel-devsys/attachments/20190826/060bf1d9/attachment-0001.pdf>


More information about the Intel-devsys mailing list